The SF10xx family of signal generators from Signalforge includes an expansion port built into the external control header. The external control header is a 20-pin dual row connector that allows the user to control the instrument for things like FSK deviation, OOK control etc. The front panel of the instrument clearly labels all the user [...]
Posted on May 13th, 2010 by SR
Filed under: Applications | 1 Comment »
Signal generators that support the CHIRP feature can be very useful when it comes to test pulsed type RF devices in applications such as RADAR or SONAR. The SF1010 supports a wide range of CHIRP possibilities by allowing the programmability of the starting frequency (plus delay time), frequency CHIRP to an ending frequency plus hold [...]
Posted on May 13th, 2010 by SR
Filed under: Applications | 1 Comment »
The SF1000 was used to emulate the outputs of a 4-cylinder engine in order to bench test a new Engine Controller (called ECU or ECM) design Using this device as a simulator, development of an ECU was accelerated by many months The ECU supported the following features: - Sequential injection with individual cylinder trim - [...]
Posted on May 13th, 2010 by SR
Filed under: Applications | 1 Comment »
Using Labview To Control The SF1010 – A Primer
Posted on May 13th, 2010 by SR
Filed under: Applications | 1 Comment »